215kwh C&I Energy Storage System: Liquid Cooling Battery

215kwh C&I Energy Storage System: Liquid Cooling Battery

215kwh C&I Energy Storage System-Liquid Cooling Battery

215kwh C&I Energy Storage System: Liquid Cooling + 100kw/215kwh + LFP battery + customisation available. Used in factories, commercial buildings, office buildings, etc. The smart, safe, and cost-effective solution for peak-shaving, backup power, and sustainable energy optimization. Cut your electricity bills while ensuring reliable power supply for your facility.

C&I lithium ion battery energy storage cabinet with an installed capacity of 100kW/215kWh, including 215kWh battery, battery management system, energy management system and auxiliary systems (including fire-fighting, lighting, ventilation and heat preservation systems).

215kwh C&I Energy Storage System: Liquid Cooling Battery Features

215kwh C&I Energy Storage System-Liquid Cooling Battery internal structure diagram

1. 215 kWh energy storage system using lithium iron phosphate (LFP) batteries. With real-time data acquisition of battery cells, online SOC diagnosis, system operation alarm, system protection, communication, thermal management, self-diagnostic fault tolerance and other functions.

2. BMS can locally display battery system operation status, such as system status, analogue information, alarm and protection information, etc.

3. 100kw energy storage converter wide voltage input range, equipped with grid voltage regulation, three-phase unbalance management, harmonic management system.

4. IP54 protection level outdoor cabinet, good environmental adaptability, the cabinet has a good anti-corrosion, waterproof, dustproof (sand), shockproof, anti-theft and other functions, including fire, lighting, ventilation and heat preservation accessories.

5. Energy management system can achieve all-round data acquisition, processing, display, control and rapid coordination control of all battery packs, battery stacks, converter PCS, instruments, etc. in the energy storage system.

6. If you have other requirements for the product, customization is acceptable.

215kwh C&I Energy Storage System: Liquid Cooling Battery Datasheet

215kwh C&I Energy Storage System-Liquid Cooling Battery Dimension

DC Side Datasheet

Energy: 215.04kwh

DC Voltage Range: 672~876v

DC rated current: 140A

 

Maximum DC current: 180A

Maximum DC power: 110kw

AC Side Datasheet

Rated AC Power: 100kw

Rated Grid Power: AC 380v

Control Power Supply: AC 220v

AC Access Method: three-phase, four-wire

Grid Frequency Range: 50±2.5Hz

Grid Voltage Range: -10% ~ +15%

Total Harmonic Distortion Rate of Current: ≤3% fully loaded

Power Factor: -1 ~ +1

System Datasheet

Dimension (W*D*H): 1550*1400*2100mm

Weight: 3t±0.2t

Discharge Depth: ≥86% under rated condition

Noise: ≤ 65 dB

Allowable Relative Humidity: ≤ 95% without condensation

Cooling Method: Liquid Cooling

Fire-fighting System: Aerosol/Perfluorohexanone

Protection Level: IP54

Altitude: ≤ 2000 metres,greater than 2000 metres requires derating

Communication Interface: LAN, RS485

Communication Protocol: MODBUS TCP, IEC104

Battery Grouping Datasheet

Battery Cell

Nominal Capacity: 280Ah

Nominal Voltage: 3.2v

Internal Resistance: ≤0.4mΩ

Weight: 5.4±0.15kg

Maximum Charging Current: 140A

Maximum Voltage: 3.65v

Maximum Discharge Current: 180A

Discharge Termination Voltage: 2.5v

Maximum Operating Temperature Range, Charging: 0~55℃

Maximum Operating Temperature Range, Discharge: -30~55℃

Battery Module

Grouping Method: 1P48S

Nominal Capacity: 280Ah

Nominal Voltage: 153.6v

Nominal Energy: 43008wh

Equalisation Method: passively

Battery System

Grouping Method: 1P240S

Nominal Capacity: 280Ah

Nominal Voltage: 768v

Nominal Energy: 215.04kwh

Ask For A Quick Quote

We will contact you within 4 hours in working day.